BGI – Thiết bị lấy mẫu bụi cao độ ở không khí xung quanh Model: PQ167HA

BGI – Thiết bị lấy mẫu bụi cao độ ở không khí xung quanh

Model: PQ167HA

Hãng sản xuất: BGI – Mỹ

Tham khảo tại: http://bgiusa.com/aam/pq167ha.htm

Applications

§  Dust & Particulate Monitoring in Mountainous Regions

§  Sampling Sites with Elevations up to 15,000 Ft (4572 meters)

§  Visibility & Pristine Area Monitoring

§  Fully Solar Compatable for Remote Site Locations

§  BGI's New miniPM Inlet Compatable with EPA PM10 Designated PQ167 Sampler (RFPS-1298-124)

§  5.0 Liter/Minute Flow Rate Control

§  BGI's New miniPM Inlet is specially designed with multiple Size Selective Nozzles for user application for PM10, PM4, PM2.5, PM1 and TSP. Omni-directional inlet built to EPA design has been verified and requires no impactor oil

Through BGI’s continuing advances in the design of new inlets and cyclones, we are proud to offer a new sampler as a solution to the historical problem of high altitude sampling. BGI offers the model PQ167HA as an EPA type platform sampler that operates at a controlled flow rate of 5 LPM at elevations up to 15,000 feet (4,572 meters). The user can select a size selective inlet nozzle to collect a TSP, PM10, PM4, PM2.5 or PM1 sample and record all the sampling conditions while maintaining the flow rate constant up to 24 hours without AC power. The PQ167HA offers a solution for US EPA type samplers where the volume sample rate must remain constant to determine the precise cut-off diameter of the particulate. The sampler can operate from the internal DC battery for a 24 hour sample or use the AC mains power to recharge and operate the sampler. Ambient particulate is collected on a 47mm filter substrate identical to the EPA Federal Reference Method Sampler, making laboratory and site operating procedures consistent with EPA reference samplers.

Ordering Information:

PQ167HA	Complete sampling platform using the BGI PQ167 PM10 EPA Reference Method Sampler with miniPM 10 inlet. Includes Inlet, sample inlet transport tube, 46.2mm Filter Holder and Filter Cassette. PQ100 sampler includes Keypad, LCD display, RS232 Connector, Environmental Enclosure with Pump, Flow Control, Data Logger amd Microprocessor. Tripod and sampler support tray included. Also includes RS232 Data Cable, MS compatible software and Operation/Service Manual. Sampler configured with P/N 2616 PM10 Nozzle. For other Size Selective sampling requirements choose from one of the following inlet nozzles and optional equipment.
2599	TSP (Total Particulate) Sampling Nozzle for miniPM Inlet
2616	PM 10 Sampling Nozzle for miniPM Inlet
2741	PM 4.0 Sampling Nozzle for miniPM Inlet
2617	PM 2.5 Sampling Nozzle for miniPM Inlet
2618	PM 1.0 Sampling Nozzle for miniPM Inlet
F215	Filter Cassette & Field Transport Carrier
2738	Inlet Flow Rate Calibration Adapter for deltaCal
2739	Inlet Flow Rate Calibration Adapter for triCal

For existing users of the BGI PQ167 Sampler, the following parts can be added to retrofit a sampler for high altitude sampling:
5010	miniPM Inlet for 5 LPM Sampling. Includes P/N 2616 PM10 Sampling Nozzle*
A1904	Inlet Adapter (Filter Holder Exit to Stand)
5017	Filter Holder w/Cassette and Screen

Optional Items
F215	Filter Cassette and Field Transport Carrier
2738	Inlet Flow Rate Calibration Adapter for deltaCal
2739	Inlet Flow Rate Calibration Adapter for triCal