GX-2012 – Máy đo khí độc: LEL, O2, CO, H2S Model: GX-2012

GX-2012 – Máy đo khí độc: LEL, O2, CO, H2S

Model: GX-2012

Hãng sản xuất: RKI – Mỹ

Tham khảo tại: http://www.rkiinstruments.com/pages/gx2012.htm

1.      Tính năng kỹ thuật:

-          Monitors ppm LEL, % volume methane, O2, CO and H2S

-          0 to 100% volume methane option

-          Auto-ranging display of % LEL and % volume

-          3 Operating modes: Normal, leak check, & bar hole

-          Leak check mode:

§  PPM leak detector, detects down to 100 ppm CH4

§  Adjustable display ranges: 500/1000/2000/5000 ppm

§  Visual / audible pulses change with gas concentration

§  CO display in leak check mode, ideal for residential investigations

-          Barhole test mode for underground leak checks

-          Status indicators: Pump active, microprocessor status and battery level

-          Internal sample drawing pump with up to 50 foot range

-          Vibration, visual, and audible alarms

-          Automatic backlight during alarms

-          Bump test and calibration reminder with lock out option

-          Lithium ion or alkaline battery packs (interchangeable)

-          Alarm latching or non-latching

-          High impact, dust and water resistant design

-          Up to 600 hours of datalogging with alarm trends

-          Snap-logging - on demand data recording

-          TWA and STEL readings with lunch-break mode

-          Intrinsically safe, ATEX/IECEx/CE or CSA/CE (Optional)

-          2 year warranty

2.      Ứng dụng:

-          Personal monitoring

-          Confined space entry

-          Refineries / petrochemical

-          Chemical plants

-          Hazardous material

-          Water / wastewater treatment

-          Fire services

-          Mining

3.      Thông số kỹ thuật:

Gas Detected	Combustible Gases (Methane as standard)	% Volume Methane	Oxygen (O2)	Hydrogen Sulfide (H2S)	Carbon Monoxide (CO)
Detection Principle	Catalytic combustion	Thermal conductivity	Galvanic cell	Electrochemical cell
Detection Range	0 ~ 100% LEL 0 ~ 500 / 1,000 / 2,000 / 5,000 ppm	0 ~ 100% Vol.	0 ~ 40% Vol.	0 ~ 100 ppm	0 ~ 500 ppm
Accuracy Statement (whichever is greater)	± 5% of reading or ± 2% LEL (LEL mode only)	± 5% of reading or ± 2% of full scale	± 0.5% O2	± 5% of reading or ± 2 ppm H2S	± 5% of readingor ± 5 ppm CO
Sampling Method	Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
Display	Digital LCD with 7 segments, auto backlight during alarm
Preset Alarms (User Adjustable)	1st alarm 10% LEL 2nd alarm 50% LEL Over alarm 100% LEL	No alarms for % Vol. CH4	Low alarm 19.5% High alarm 23.5% Over alarm 40.0%	1st 5 ppm 2nd 30 ppm TWA 10 ppm STEL 15 ppm Over 100 ppm	1st 25 ppm 2nd 50 ppm TWA 25 ppm STEL 200 ppm Over 500 ppm
Alarms Types	Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error
Alarm Methods	Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration
Operating Temp. & Humidity	-20°C to +50°C (-4°F to 122°F) 0 to 95% RH, non-condensing
Response Time	Within 30 seconds (T90)
Continuous Operation	Alkaline battery: 15 hours Li-Ion battery: 10 hours 70°F (21°C)
Power Source	Li-Ion battery pack, or 3 “AA” Alkaline battery pack; interchangeable
Safety Rating	ATEX, TIIS, IECEx, and CE or optionally: CSA classified as intrinsically safe. Class I, Division 1, Groups A, B, C, D, and CE Note: Either ATEX (USA and worldwide) or CSA (Canada) version must be specified when ordering.
Dimension & Weight	Approx. 143 (H) x 71 (W) x 43 (D) mm (5.6” H x 2.8” W x 1.6” D), approx. 350 g (12.3 ounces)
Case Material	High dust & water resistant design. RFI shielded high impact plastic with protective rubber overmolding
Controls	Five buttons: POWER / ENTER, DISPLAY, AIR, RESET, SHIFT
Standard Accessories	• Belt clip • Rubber nozzle, 3.5” • Datalogging software • 10” Probe • Manual • Quick reference card • 10’ Hose • Training CD
Optional Accessories	• SDM-2012 calibration stations • Calibration kit • Li-Ion battery pack • AC or DC Charger • Sample draw hoses (10’ standard, • Carrying case up to 50’ max. available)
Configurations	1, 2, 3, 4, or 5 sensor units Li-Ion or alkaline battery pack options
Warranty	Two years material and workmanship